After the installation of Events2HVAC, you will need to configure the connection to the C-Cure server.
1. Open the Events2HVAC client.
2. Select
Device Interface
à C-Cure
à C-Cure Options.
(Note: If you don’t see this option, either you didn’t load the C-Cure interface
during setup, or you need to rediscover your devices using Device Interface
Manager.)
3. On the
C-Cure Options tab, enter the information specific to your C-Cure
system. See the next section on
C-Cure interface options for details about
each field.
4. Test
the connection by clicking on the “Test Login” button to show if a connection is
successful.