|
Field Name |
Description |
Notes |
|
action:equipmentname |
Name of the equipment item as seen in the equipment manager. |
Unique |
|
action:devicename |
Name of the device interface |
NetX |
|
action:name |
Name of the particular action |
SetOccupied |
|
action:order |
If multiple actions are present in the equipment item, this defines the order. |
0 |
|
action:functionid |
Custom event function that will activate this action. |
This is normally blank. |
|
action:triggername |
Name of the trigger that executes the action |
EventStartStop, EventSetupTeardown |
|
action:objectname |
Unique point object name |
|
|
parm:ipaddress |
IP address of NT-RELAY |
Note: this can also be the IP of the port sharing service, controller IP address, or direct thermostat IP |
|
parm:port |
Port of NT-RELAY |
Port used in NetX controller, port sharing service, or direct to thermostat. |
|
parm:devicename |
Name of the relay |
e.g. “Basement NT:Pump1” |
|
parm:occvalue |
Value to send to relay on event start |
TRUE |
|
parm:unoccvalue |
Value to send to relay on event stop |
FALSE |
|
parm:actionstate |
Not applicable |
blank |
|
parm:relaynumber |
Number of the relay to command |
1-2 |
|
parm:useglobalpassword |
flag to use global password instead of one assigned to this device |
true/false |
|
parm:encpassword |
Encrypted password of the device |
string |