After the installation of Events2HVAC, you will need to configure the connection to the P2000 server.
1. Open the E2H client.
2. Select
Device Interface
àJCI
P2000 àJCI P2000
Options. (note: if you don’t see this option, either you didn’t load
the JCI P2000 interface during setup or you need to re-discover your devices
using Device Interface Manager.
3. On the
P2000 Options Tab, enter the information specific to your P2000
system. See the next section on P2000 interface options for details on each
field.
4. Test the connection. If it is successful, you are ready to start adding equipment.