|
Field Name |
Description |
Notes |
|
action:equipmentname |
Name of the equipment item as seen in the equipment manager. |
Unique |
|
action:devicename |
Name of the device interface |
NetX |
|
action:name |
Name of the particular action |
SetOccupied |
|
action:order |
If multiple actions are present in the equipment item, this defines the order. |
0 |
|
action:functionid |
Custom event function that will activate this action. |
This is normally blank. |
|
action:triggername |
Name of the trigger that executes the action |
EventStartStop, EventSetupTeardown |
|
action:objectname |
Unique point object name |
|
|
parm:ipaddress |
IP address of thermostat |
Note: this can also be the IP of the port sharing service, controller IP address, or direct thermostat IP |
|
parm:port |
Port of thermostat controller |
Port used in NetX controller, port sharing service, or direct to thermostat. |
|
parm:deviceaddress |
Address of the thermostat |
Integer |
|
parm:devicename |
Name of the thermostat |
e.g. “T stat 01” |
|
parm:valuestart |
Value to send to daymode on event start |
TRUE |
|
parm:valuestop |
Value to send to daymode on event stop |
FALSE |
|
parm:actionstate |
Not applicable |
blank |
|
parm:sendsetpoint |
Flag to send all modes and setpoint |
TRUE/FALSE |
|
parm:occclg |
Occupied cooling setpoint |
Integer |
|
parm:occhtg |
Occupied heating setpoint |
Integer |
|
parm:unoccclg |
unoccupied cooling setpoint |
Integer |
|
parm:unocchtg |
unoccupied heating setpoint |
Integer |
|
parm:occfanmode |
Occupied fan mode |
AUTO, ON, OFF |
|
parm:occhvacmode |
Occupied hvac mode |
AUTO, COOL, HEAT, OFF |
|
parm:unoccfanmode |
unoccupied fan mode |
AUTO, ON, OFF |
|
parm:unocchvacmode |
unoccupied hvac mode |
AUTO, COOL, HEAT, OFF |