StartStop Action - Apogee Point

The StartStop action sends a command to a point for each side (start and stop) of an event. The Start value is sent to the object when an Event Start or Event Setup Start has been triggered. The Stop value is sent to the object when an Event Stop or Event Teardown Stop has occurred.

Graphical user interface, text, application, email

Description automatically generated

This action only applies to the following event triggers:

• EventStartStop

• EventSetupTeardown

• ZoneFirstLastEventStartStop

• ZoneFirstLastSetupTeardown

• EventStart

• EventStop

• EventSetupStart

• EventSetupStop

• EventTeardownStart

• EventTeardownStop

• ZoneFirstEventStart

• ZoneLastEventStart

• ZoneFirstSetupStart

• ZoneFirstTeardownStart

Field Name	Description	Remarks
Object Id	This is the unique point id of the point to control	Selectable from the list of points available from the view.
Object Name	Friendly object name
Type	Type of point	Apogee Point.Command
Property	Value
Priority	Priority value for commanding an object.	NONE, PDL, EMER, SMOKE, OPER
StartValue	Value to write to the select property when an event start is triggered.	Depends on object type
StopValue	Value to write to the select property when an event stop is triggered.	Depends on object type. Ignored if using a single action trigger (e.g. EventStart).
Release Priority	Checking will send the value and release the priority to NONE.

Refresh Button

Click on the Refresh button to reload available points from the currently selected view.

Verify Button

Click on the Verify button to verify that the selected object and properties can be read. The results of the verification will be shown in the Results window.

Test Start Button

Click on the Test Start button to attempt to write the defined START value to the object. The results of the test will be shown in the Results window.

Test Stop Button

Click on the Test Stop button to attempt to write the defined STOP value to the object. The results of the test will be shown in the Results window.

Note: If a single action trigger is used (e.g. EventStart), this button will be disabled and only the start value and button will be used for sending the command.

Release Priority Button

Click on the Release Priority button to release the objects’ priority and return to NONE priority. The results of the test will be shown in the Results window.