After the installation of Events2HVAC, you will need to configure the connection to the Verkada server.
1. Open the E2H client.
2. Select
Device Interface
à Verkada
à Verkada Options.
(Note: If you don’t see this option, either you didn’t load the Verkada
interface during setup, or you need to rediscover your devices using Device
Interface Manager.)
3. On the
Verkada Options tab, enter the information specific to your Verkada
system. See the next section on Verkada interface options for details
about each field.
4. Test
the connection by clicking on the Test Connection button.
The Verkada interface is now ready to be configured for your integration.