For other improvements and fixes see release notes.
New Features/Improvements
•[EH-2991] - DesigoCC: SendExceptionSchedule action
•[EH-2997] – Planning Center: Include setup and teardown in event data so that actions can trigger off those.
Bug Fixes
•[EH-2506] - Honeywell: Task ID check tool doesn't show correct elapsed time in all cases
•[EH-2977] - DesigoCC: Reload points doesn’t load new points added
•[EH-2978] - DesigoCC: Devices aren't shown in point list
•[EH-2979] - DesigoCC: P2 devices have subpoints as properties that can't be commanded
•[EH-2980] - DesigoCC: P2 binary commands need to be handled differently
•[EH-2981] - DesigoCC: Error response in the UI when token expires instead of login
•[EH-2982] - Planning Center: event filter tags aren’t getting filtered (also fixed in v1.8.2.11+)
•[EH-2986] - DesigoCC: Release priority doesn't seem to work on P2 binary pt
•[EH-2987] - DesigoCC: Default system view selected doesn’t save
•[EH-2988] - DesigoCC: unexpected output on P2 BV when release used
•[EH-2990] - DesigoCC: Command result message shows wrong state
•[EH-2992] - HoneywellTCC: Default setpoint changes don't prompt for restart
•[EH-2993] - Honeywell Home: Issue commanding auto mode
•[EH-2994] - Honeywell Home: T5-T6 commands fail due to null autoChangeOverActive
•[EH-2995] - Honeywell Home: Capture faultstring in error response
•[EH-2996] - Honeywell Home: Token needs to be shared - invalid grant on server when UI is used
•[EH-2998] - BACnet: Exception schedule state change didn't trigger
•[EH-2999] - BACnet: Exception schedule tab is not showing all exceptions
•[EH-3003] - OpenPath: Schedule push isn't optimized - pushes same schedule every poll
•[EH-3004] - Honeywell Home: removing thermostats doesn't remove them from the settings
•[EH-3005] - Honeywell TCC: removing thermostats doesn't remove them from the settings