(This option may be removed in the future)
This tab allows you to select which BACnet object types are shown in the Action user interface when it is loaded. Currently, only the Analog_Output, Analog_Value, Binary_Output, Binary_Value, Multistate_Output, Multistate_Value object types should be used with the WriteProperty and StartStop Actions.
Note: A Schedule Action might be developed in the future for creating exception schedules instead of commanding objects.
Allow Priority 0 Writes
This checkbox, if checked, will enable a priority 0 to be sent with a write command to a point that does not support priority array. This is a special case so normally this would be unchecked.