If you are planning on adding the GE/HP22-WIFI or GE/HP22-IP stand-alone thermostats to E2H, you must configure the thermostats to allow ASCII communications to the NetX API and make sure you have a static IP address.
Step 1 – Login to each thermostat using your browser. Click on the “Configuration” link.
Step 2 – Click on the “Network Settings” link.
Step 3 – In the “ASCII Port” section, set the appropriate port for the API connection. UNCHECK the “Enable Login” checkbox.
Step 4 – UNCHECK the “Enable DHCP” checkbox and enter the appropriate static IP address.
Step 5 – If you changed any settings, hit the “SAVE & REBOOT” button.
Repeat the steps for all stand-alone devices and take note of the IP address, Port, and name of each for later entry.